Curtain set Sont-16 1-track, round tube Ø 16mm and accessories made of stainless steel, end pieces, hooks and rings of your choice

Designer curtain rod with stainless steel tube for wall mounting and ceiling mounting. In the sets with the round tube, the curtains are attached to the rod with rings or curtain hooks or loops or eyelets. This variant is the most commonly used version for attaching curtains and blinds when decorating windows.
You order a complete curtain rod consisting of:
1 pc. tube Ø 16mm made of stainless steel, the silky matt look is absolutely suitable for our rod holders and end buttons made of stainless steel. Lengths of up to 600 cm in one piece are also possible on request.
2 pieces, 3 pieces or 5 pieces (depending on the ordered length) rod holders Sont-16 single-track with the base plate, material is solid stainless steel DIN WNR 1.4301 satin-polished, incl. fastening material.
2 end pieces (of your choice), the version with just one end piece or without end pieces is also possible, for example to use a joint connector or a wall bracket at this point.
Desired number of curtain rings or curtain hooks, we recommend at least 10 rings or hooks per 1 meter of curtain width.
*Custom-made products on request, apart from straight curtain rods, we also bend all our rod sets in any other shape, made absolutely according to your needs and space situation.

Order the correct style set length.

Ordered size is the tube length without end pieces.
*If desired, please enter the number in cm in the field "shorten by:". then we will cut the tube to the right length for you. For example: If you need a tube of exactly 222cm, then under "Length" please select - 240cm, and in the field "Shorten by:" enter the number "18 cm". Sections are not sent.
* Parcel service shipping:
The curtain rods up to 260cm are always delivered in one piece.
The bar is divided as follows from a length of more than 260cm:
up to 520cm divided in the middle
from a length over 520cm 1/3 + 1/3 + 1/3 divided
A connection adapter is always included. A rod support should always be attached at the connection point.
* Freight forwarding:
The poles longer than 260cm and up to 400cm are delivered in one piece.
The tubes longer than 520cm and up to 600cm are divided in the middle
*Curtain rods longer than 400cm and up to 600cm in one piece - price on request.

Rod holder Sont-16 1-track, fastening system assembly instructions.

With this rod support system, you can easily carry out the curtain decoration on the floor, then attach the completely decorated curtain rod to the wall or ceiling. You can place the holders on the rod absolutely freely. First attach the mounting plate to the wall with Spax screws. Then cover the mounting plate with the base washer and screw the carrier onto the mounting plate threaded pin. Then insert the tube or profile into the holder openings and fix it with the clamping screws. You can also place the Sont curtain holder with the openings facing downwards. In this position, too, the tube or the aluminum profile is held firmly with the clamping screws.

Order desired stainless steel end pieces for the curtain rod Sont-16 in one run.

We have different end pieces for our 16mm sets. Simply select the desired end piece in the corresponding field. In the pictures you can see our range of end pieces and end knobs for tubes with a diameter of 16mm. Of course, you can also order the version without end pieces, for example to use a joint connector for bay windows or a wall bracket at this point.

Connect pipe ends with angle joint to create bay window curtain rods, for example.

If you need an L-shape or U-shape curtain rod for your room, if you want to create a trapezoidal style set for your bay window, then you can use our stainless steel joints for the round tubes with a diameter of 16mm. These articulated connectors are inserted into the pipe ends instead of the end pieces, so you can easily achieve any angle from 75° to 285°.
To configure an L-shaped rod, order: 1 pc. curtain rod with 2 pcs. end pieces + 1 pc. curtain rod without end pieces but with 1 pc. joint connector
To compose a U-shape or a 3-side trapezoidal curtain rod, order: 2 pcs. curtain rod with 1 pc. end piece + 1 pc. curtain rod without end pieces but with 2 pcs. joints
Do you need help putting it together? Write to us or call us.

Also order rings made of stainless steel for the curtain rod Sont-16.

You can use our stainless steel rings to attach curtains to a curtain rod with a round tube. These curtain rings are made of stainless steel with a plastic insert for quiet sliding of the curtains. All rings are supplied with clip-on hooks (folding hooks) made of plastic (transparent).
Please refer to the drawing for the dimensions:
D1 = 30mm
D2 = 37mm
H = 62mm

Order curtain hooks made of steel, nickel-plated, for 16mm curtain sets.

You can use our nickel-plated steel hooks to attach the curtain to the Pole 16 rod.
Please refer to the drawing for the dimensions.

Stainless steel S-hook for 16mm diameter rods and tubes.

S-hook made of V2A stainless steel, absolutely stable and robust, but at the same time very smooth-running, bent from 3mm stainless steel wire, ends are punched. For indoor and outdoor use as a curtain hook. Easy attachment and detachment to 16mm rods by "clamp system with 15mm opening"
Please refer to the drawing for the dimensions.

Product Information: Stainless Steel Ring Hook for 16mm Pipes

The V2A stainless steel ring hook is characterized by high stability and smooth mobility. Manufactured from 3mm thick stainless steel wire with precisely stamped ends, it features a closed form that ensures increased security against theft. Suitable for commercial use both indoors and outdoors. Please refer to the attached technical drawing for detailed dimensions.