Configure your own kitchen railing made of V2A stainless steel: System Post 16

Kitchen railing which combines classic style with functionality, railing system Pfosten-16 with the round tube Ø 16mm completely in stainless steel V2A with a satin finish. Consists of stainless steel tube Ø 16mm, railing supports for posts 16 in a version that is closed on the side and open on the side, optionally with or without a base plate. From a length of 140 cm, the intermediate supports are supplied open at the side. If you choose the version with open external supports, you can use the cylinder end pieces or the impact caps to close the pipe ends. Of course, you can also select the tube without end pieces, for example to mount the joints or the wall brackets on the tube ends. The material is solid stainless steel DIN WNR 1.4301 with a satin finish. We offer railing hooks made of nickel-plated steel or S-hooks made of stainless steel for hanging up kitchen accessories. Mounting material included for simple 1-point attachment. With the help of additional brackets, joints and wall brackets, it can be expanded to form a U-shaped and L-shaped railing system.
*Custom-made products on request, apart from straight railings, we also bend all our railing rods into any other shape, made absolutely according to your needs and space situation. Just send us a sketch and you will receive an offer for your individual railing.

Railing post-16: order correct length.

Ordered railing size is the pure tube length. The total length is usually greater, in the version with closed outer brackets, the allowance for the brackets and possibly the base washers are added, in the version with open outer brackets, the allowance for end pieces is added to the tube length. Please refer to the drawing for the dimensions
*If desired, please enter the number in cm in the field "shorten by:". then we will cut the tube to the right length for you. For example: If you need a tube of exactly 223cm, then under "Length" please select - 240cm, and in the field "Shorten by:" enter the number "17 cm". Sections are not sent.
* Parcel service shipping:
The tubes up to 260cm are always delivered in one piece.
The tube is divided in the middle from a length of 260cm.
A connection adapter is always included. A holder is to be attached to the connection point.
* Freight forwarding:
The tubes longer than 260cm and up to 400cm are delivered in one piece.
*Rail longer than 400cm (also in one piece) - price on request.

Post 16 railing carrier, short: Fastening and assembly instructions for various versions.

With this railing carrier system you can choose the following versions: carriers closed on the side (left and right) and carriers open on the side. Closed straps hold the railing bar and at the same time close the tube ends. If you decide to use the open version of the outer beams, you should close the tube ends with end pieces, we offer knock-in caps and end pieces cylinders for this, of course you can also leave the tube ends open to place a joint or a wall bearing (separately in individual parts) at this point. 16mm to be found).
You can mount these railing brackets horizontally (wall or front edge of countertop) or vertically (cupboard, shelf bottom or top edge of countertop).
First, attach the stud (with or without a base washer) to the wall, countertop, or cabinet.As standard, we supply a spax screw with the dowel as fastening material.The bolt has a continuous M6 thread, so an alternative attachment with a hanger bolt, metric screw or mounting plate is possible.
Then slide the railing brackets (along with the tube) onto the bolts and tighten the bracket grub screws (not too tight).
Of course it is also possible to extend the bracket (optional). We also offer a 50mm extension made of stainless steel for the post support system. You connect the extension and the carrier with an adapter.

Order tube end pieces for the railing post-16.

If you choose the outer railing carrier in open design, you must close the tube ends nW. We offer impact caps or cylinder end pieces for our railings. Simply select the desired end piece in the corresponding field. Of course, you can also order the version without end pieces, for example to use a pipe joint or a wall bracket at this point.

Connect tube ends with joints to create an L-shape or U-shape railing.

If you need an L-shape or U-shape or trapezoidal-shape railing for your kitchen, then you can use our stainless steel joints for the round tubes with a diameter of 16mm. These joints are inserted into the railing tube ends instead of the end pieces, so you can easily achieve any angle from 75° to 285°.
To assemble an L-shaped railing, order: 1 pc. railing with a tube open on one side and 1 pc. end piece + 1 pc. railing with a tube open on one side, 1 pc. end piece and with 1 pc. joint
To create a U-shape or a 3-sided trapezoid railing, order: 2 railings with a tube open on one side and 1 piece end piece + 1 railing with a tube open on both sides without end pieces but with 2 pieces joints
Do you need help putting it together? Write to us or call us.

Order railing hooks made of steel, nickel-plated, for 16mm railings.

You can use our nickel-plated steel hooks to attach kitchen utensils to the railing Post-16.
Please refer to the drawing for the dimensions.

S-shaped railing hook for poles and tubes with a diameter of 16mm, material stainless steel.

Hook S-shape made of V2A stainless steel, very stable and robust, but at the same time very smooth-running, bent from 3mm stainless steel wire, ends are punched. For indoor and outdoor use as a railing hook. Easy to attach and detach to 16mm pipe by "clamping system with 15mm opening"
Please refer to the drawing for the dimensions.

Examples of use and expansion: Kitchen rail post 16, with stainless steel tube Ø 16mm.

Kitchen rail post 16 for separating shelves, worktops or hobs in the kitchen.




Post 16 railing system attached to the edge of the worktop and bent at 90° as an inside corner. Inside and outside corners are possible with any angle, also realizable with stainless steel joint 16mm. Functional towel holder for the kitchen area. Simply hang towels or potholders that you don't need at the moment on the rail, they stay close by and are always at hand.



Railing systems U-shape for outside corner with post 16. End is also possible with wall bracket. The inside corner solution is also implemented according to the same principle.



Bay window kitchen railing with inside corner for kitchen area, railing system in trapezoidal shape: we manufacture your railing for every wall angle or worktop angle, whether outside or inside corner.



We will also be able to manufacture a suitable railing for you for curved walls in the kitchen or round worktops.