Inner track curtain rod for wall mounting, Sont-20, single track.

This classic inner track rod for wall mounting impresses with its practical inner track system, which allows the curtain to move freely over the entire length of the rod. Thanks to the open construction of the supports, the glider always remains unimpeded, so that the curtain runs smoothly.

The scope of delivery of your order includes:

• 1 pc. inner runner profile (Ø 20mm) made of aluminum with anodised surface in stainless steel look, suitable for our carriers and end pieces made of V2A stainless steel. The glider running width is 6mm and the length varies between 100cm and 600cm. Lengths up to and including 400cm (in one piece) can be ordered online here, lengths up to 600cm in one piece are also available on request.
• 3 to 5 wall brackets Sont-20 (depending on the length ordered) with base plate made of V2A stainless steel, including fastening material. If desired, you can also order carrier extensions.
• 2 end pieces (of your choice). You also have the option of choosing a version without end pieces.
• The desired number of curtain gliders different glider systems are available. We recommend at least 10 gliders per meter of curtain width.

Custom-made products are possible on request. In addition to straight curtain rods, we can also bend and manufacture any other shape according to your individual needs and room conditions.

How to order the Sont-20 single track inner track curtain rod in the correct length:

The ordered size refers to the length of the inner tube without end pieces.

If you require a specific length, please enter the appropriate centimeters in the "Trim by:" field. We will then cut the aluminum profile to the right length for you. For example, if you need an inner running rod of exactly 247 cm, please select under "Tube length" - 260 cm and enter "13 cm" in the field "Shorten by:". Please note that we do not ship sections.

Parcel service shipping:

Pipes up to a length of 260 cm are always delivered in one piece. With a length of more than 260 cm, the tube is divided as follows:

• Up to 520 cm, the tube is divided in the middle
• From a length of more than 520 cm, the tube is divided into thirds (1/3 + 1/3 + 1/3)

A connection adapter is always included in the scope of delivery. A support should be attached to the junction.

Freight Forwarding:

Pipes longer than 260 cm and up to 400 cm are delivered in one piece. Pipes longer than 520 cm and up to 600 cm are split in the middle.

For curtain rods that are longer than 400 cm and up to 600 cm and are to be delivered in one piece, please ask us about the price.

Wall mounting system Sont-20 1-track (exclusively made of V2A stainless steel).

The placement of the wall brackets on the curtain rod is absolutely freely selectable. First attach the base plate to the wall with the bolt. Here you have the option of either attaching the base plate and the bolt with a screw-on plate or screwing them on directly with a Spax screw. Then slide the carrier onto the bolt and tighten the carrier's grub screw (but not too tight). Then insert the inner rail into the openings of the carrier and fix it with the clamping screws of the carrier.

It is of course also possible to extend the wall bracket (optional). For this we offer a standard extension of 50mm for the Sont 20 carrier system. You connect the extension and the carrier using an adapter. If you need special lengths for the extensions, we can make them on request.

Color options for our 20mm diameter round inner bars

Our aluminum inner running rods with a diameter of 20mm are available in four attractive surface variants: stainless steel look, glossy white, matt black and glossy black. You can also order matching end pieces made of V2A stainless steel and end caps made of glossy white aluminum or satin black aluminum.

Note: Our wall brackets are only available in V2A stainless steel!

Open up the possibility of combining different colours, such as stainless steel and white, black and white or stainless steel and black. Use this opportunity to design your curtain rods according to your personal ideas and needs.

Order desired gliders with hooks for curtains and curtains:

X Glider: Standard curtain gliders with pleating hooks, made entirely of plastic, color white, are inserted into the rail at the side.

Order desired gliders with hooks for curtains and curtains:

X Glider: Standard curtain gliders with pleating hooks, made entirely of plastic, color white, are inserted into the rail at the side.

rotary glider: Comfort curtain gliders with clip-on hooks, made entirely of plastic, color white, these gliders can be screwed in or out at any point on the inner track system.

Glides with stainless steel hooks: Very stable (up to 1.5 kg/each) and at the same time very smooth-running gliders with stainless steel hooks. Particularly suitable for heavy drapes and drapes, wet areas and outdoor areas, e.g. curtains for vestibules or wind protection curtains for patios or balconies.

loop gliders: Sliders for loop curtains made entirely of plastic, color white. Due to its semicircular shape, the sliding element offers very good sliding properties in all of our inner rails.

Individual end pieces made of V2A stainless steel for our Top-20 curtain rod inside

Explore the variety of end pieces for our high-quality 20mm aluminum profiles. Simply choose the right end piece from the numerous options in our selection field. Our picture gallery impressively presents the diverse selection of stainless steel end pieces and end knobs, as well as variants made of black and white aluminum for 20mm profiles.

Of course, an order without end pieces is also possible. This gives you the flexibility to utilize alternative options such as a wall mount, arch or sling-through corner. Our goal is to find the perfect solution for your individual needs.

Browse our extensive selection and give your curtains and curtain rods the perfect finishing touch!