Curtain rod Sont-10 double-track, end pieces, rings, hooks of your choice, freely configurable.

Classic style set with the stainless steel tube for wall mounting. With the round tube curtain rods, the curtains are attached to the rod with curtain rings or curtain hooks or loops or eyelets. This version is the most used version for hanging curtains and blinds when decorating windows.
You order a complete curtain rod consisting of:
2 pcs. stainless steel tube Ø 10mm, the stylish and silky matt look is absolutely suitable for our wall brackets and end pieces made of stainless steel. Lengths of up to 600 cm in one piece are also possible on request.
2 pieces, 3 pieces or 5 pieces (depending on the length ordered) Wall bracket Sont-10 2-line. incl. base washers, material is stainless steel DIN WNR 1.4301 satin finished, incl. fastening material.
Up to 4 pieces of end pieces (of your choice), it is also possible to order without end pieces.
Desired number of curtain rings or stainless steel hooks, we recommend at least 10 rings or hooks per 1 meter of curtain width.
*Custom-made products on request, apart from straight curtain rods, we also produce all our stylish sets in any other shape, absolutely curved according to your needs and room situation.

Order the correct style set length.

Ordered size is the length of the tube without end fittings.
*If desired, please enter the number in cm in the field "shorten by:". then we will cut the pipes to the right length for you. For example: if you need a style set of exactly 227cm, then please select under "pipe length"-240cm, and in the field "shorten by:" enter the number "13 cm". Sections are not sent.
* Parcel service shipping:
The tubes up to 260cm are delivered in one piece.
The pipe is divided as follows from a length of more than 260cm:
up to 520cm divided in the middle
from a length over 520cm 1/3 + 1/3 + 1/3 divided
A connection adapter is always included. A wall bracket is to be attached at the connection point.
* Freight forwarding:
The tubes longer than 260cm and up to 400cm are delivered in one piece.
The tubes longer than 520cm and up to 600cm are divided in the middle
* Curtain rods longer than 400cm and up to 600cm in one piece - price on request.

Curtain rod mounting system Sont-10 two-track for wall mounting.

With this wall bracket system, you can easily decorate the curtains on the floor, then mount the completely decorated curtain rod on the wall. You can distribute the wall brackets on the rod absolutely freely, of course pay attention to the even curtain weight distribution.
First mount the screw-on plates with Spax screws on the wall. Then cover the mounting plates with the base washers and screw the supports onto the mounting plate threaded pins. Then insert the tubes into the carrier openings and fix them with the carrier clamping screws. You can also place the Sont-10 curtain supports with the openings facing downwards. In this position, too, the tubes are held firmly with the clamping screws.

Order desired end pieces made of stainless steel V2A for stylish set Sont-10.

We have different end pieces for our 10mm stainless steel tubes. Simply select the desired end piece in the corresponding field. The picture shows our range of end pieces for stainless steel pipes with a diameter of 10mm. Of course, you can also order the version without end pieces, for example to use the bay window joints or the wall brackets at this point.

Connect tube ends with joints to create a bay window curtain rod, for example.

If you need an L-shape or U-shape curtain rod for your window, or if you want to create a trapezoidal style set for your bay window, then you can use our stainless steel joints for the 10mm diameter round tubes. These joints are inserted into the pipe ends instead of the end pieces, so you can easily adjust any angle from 75° to 285°.
To compose an L-shape curtain rod, order: 1 pc. (complete curtain rod with 4 pcs. end pieces) + 1 pc. (complete curtain rod without end pieces but with 2 pcs. joint)
To compose a U-shape or a 3-side trapezoidal curtain rod, order: 2 pcs. (complete curtain rod with a total of 2 pcs. end pieces) + 1 pc. (complete curtain rod without end pieces but with 4 pcs. joint)
Do you need help putting it together? Write to us or call us.

Order curtain rings made of stainless steel for stylish set Sont-10 2-track.

You can use our curtain rings to attach curtains to a curtain rod with the round tube. These rings are made of stainless steel V2A. All rings are supplied with clip-on hooks (folding hooks) made of plastic (transparent).
Please refer to the drawing for the dimensions:
D1 = 21mm
D2 = 25mm
H = 50mm

Order curtain hooks made of steel, nickel-plated, for the 10mm curtain rod.

You can use our nickel-plated steel hooks to attach the curtain to the Sont-10 curtain rod.
Please refer to the drawing for the dimensions.

S-hook for rods and tubes with 10mm and 12mm diameter, material stainless steel V2A.

S-hook made of stainless steel, very stable and robust, but at the same time very smooth-running, bent from 3mm stainless steel wire, ends are punched. For use in the living area as a curtain hook. Easy attachment and detachment to 10mm rods by "clamp system with 9mm opening".
Please refer to the drawing for the dimensions.

Stainless steel hooks made of flat steel for pipes and rods up to 10mm in diameter.

Stainless steel hooks bent from 1.7 x 3.2mm flat steel, ends are stamped. For tubes and rods up to Ø 10 mm. Also suitable for outdoor use. For use in the living area, bathroom and kitchen area.
Please refer to the drawing for the dimensions.