Order correct pipe length.

*If desired, please enter the number in cm in the field "cut by:" and we will cut the stainless steel tube to the right length for you. For example: If you need a tube of exactly 246cm, then please select below "Length"-260cm, and in the field "cut by:" enter the number "14 cm" Pipe sections will not be sent.
* Parcel service shipping:
The tubes up to 260cm are delivered in one piece.
The pipe is divided as follows from a length of more than 260cm:
up to 520cm divided in the middle
from a length over 520cm 1/3 + 1/3 + 1/3 divided
A connection adapter is always included. A rod support is to be fitted at the connection point.
* Freight forwarding:
The tubes longer than 260cm and up to 400cm are delivered in one piece.
The tubes longer than 520cm and up to 600cm are divided in the middle
* Curtain rods longer than 400cm and up to 600cm in one piece - price on request.

Home furnishing item: Tube 10, V2A - stainless steel.

Home furnishing article by Stahldeko: rod for curtain sets as a stainless steel tube with a diameter of 10 mm. Available in fixed lengths or made to measure. For self-assembly of curtain rods and other decorative solutions.

Order desired end pieces made of stainless steel V2A for curtain sets with Ø10 mm tube.

We have different end pieces for our 10mm stainless steel tubes. Simply select the desired end piece in the corresponding field. The picture shows our range of end pieces for stainless steel pipes with a diameter of 10mm. Of course, you can also order the version without end pieces, for example to use a bay window joint or a wall bracket at this point.

Connect the tube ends with a joint to create a bay window curtain rod, for example.

If you need an L-shaped or U-shaped curtain rod for your room, if you want to create a trapezoidal curtain set for your bay window, then you can use our stainless steel joints for the 10mm diameter tubes. These joints are inserted into the pipe ends instead of the end pieces, so you can easily achieve any angle from 75° to 285°.
To compose an L-shape curtain rod, order: 1 piece tube with 2 pieces end pieces + 1 piece tube without end pieces but with 1 piece joint.
To create a U-shape or a 3-sided trapezoidal curtain rod, order: 2 pcs. tube with 1 pc. end piece + 1 pc. tube without end pieces but with 2 pcs. joint.
Do you need help putting it together? Write to us or call us.

Stainless steel joint with threaded connection for Ø10 mm tubes and rods.

Thanks to its stable threaded connection, you can also use this articulated connector for vertical constructions, e.g. suspension from sloping ceilings. You can connect this joint to the solid bar or a tube with an outer diameter of 10mm. An M6 thread is to be machined into the solid bar, and the supplied threaded bushings must be hammered into the tubes. The angle of the corner connector is continuously adjustable from 75° to 285°. So you can move the curtain rods and curtain rods around the corner or around a bay window, or mount a ceiling support on a sloping roof.
You can use this joint for our tube with a diameter of 10mm as well as the following supports: "Top" support, "Primo" support, "Universal" support and ceiling support for aluminum profiles.
Scope of delivery:1 pc Articulated connector, 2 pcs. Threaded pin M6x25, 2 pcs. Threaded bushing M6x13. All parts are made of V2A stainless steel.