Aluminum curtain rails: two in one - turning rail single/double. Only 7.5mm flat!
* the rail is divided in the middle from a length of more than 260cm. Connection adapter is included. We can deliver up to 400cm in one piece by forwarding. Universal curtain rail made of aluminum for attaching curtains with gliders and panel curtains with panel carriers. Two curtain tracks in one, the reversible track, meaning you can use the same track as a 1-track or 2-track track. We offer this inner running system in standard lengths or asMade to measure, also curved. Our curtain gliders can be screwed in afterwards, ie rails can be mounted without notching holes, since the glider can be screwed out of the inner track system again. Panel carriers are intended for fastening panel curtains. The turning bar is made of extruded aluminum and has perfect running and gliding properties. The curtain rails are installed directly on the ceiling. Wall mounting is possible with an angle bracket. For ceiling mounting with suspension, our 1-lfg. Ceiling support provided. Our1-/2-line We can also bend turning rails for you. This does not affect the all-round trouble-free path of the curtain. Simply send us an inquiry or a sketch by fax or email and you will immediately receive an offer.
Turning bar 1-/2-track: Fastening system:
Pilot hole as 1-track rail: We deliver turning rails pre-drilled (distance approx. 60 cm) or not pre-drilled. You can use the railsYou can also drill yourself, aluminum rails have a drill track for precise drilling. The curtain rails are mounted directly on the ceiling, eliminating the small gap that can arise when different clips or sliding latches are used for mounting.Screws are closed with flat caps, making them invisible.
Pilot hole as 2-track rail: We deliver turning rails pre-drilled (distance approx. 60 cm) or not pre-drilled. You can railYou can also drill yourself, aluminum rails have a drill track for precise drilling. The curtain rails are mounted directly on the ceiling, eliminating the small gap that can arise when different clips or sliding latches are used for mounting.Screws are closed with flat caps, making them invisible.
Fastening without pre-drilling with ceiling support: You can also use the curtain rail with our 1-line stainless steel ceiling support. mount with suspension from the ceiling. The standard ceiling supports are 45 cm long (can be shortened, we can also manufacture longer ceiling supports). You can place these supports absolutely freely on the inner rail. We recommend a maximum distance between carriers of 120 cm. Of course, this does not affect the all-round trouble-free path of the panel curtain or curtain.
Custom bending of aluminum curtain rails for curtains and panel tracks:
Apart from straight siens, we also offer all of our inner running systems bent and made to suit your needs and space situation. Simply send us your sketch or drawing by email, fax or post and you will immediately receive an offer. Of course, all the necessary supports, wall brackets, ceiling suspensions and assembly materials are always included. Do you have anymore questions? Contact us!
Here are some examples of curved inner track curtain tracks:
L-shape curved curtain line
U-shape bend aluminum rail
Square bend for inner race systems
Inner rail curved in an S-shape
Bend curtain rails at any angle
Trapezoidal curved curtain rails
Reversible rail 1/2-track. Curtain rail made of aluminum, white, bendable.
Aluminum with the specification AlMg Si 0.5
Extruded aluminum profile
white powder-coated according to RAL 9016
curtains with pleat sliders
panel curtains with panel trolley
41.8mm wide, only 7.5mm flat
Screw Directly onto the Ceiling
Wall Mounting with Angle Bracket
Ceiling Mounting with Drop
End caps, swivel runners, locks, ceiling mounts, panel trolleys
Scope of Delivery
Turn rail without pre-drilling or with pre-drilling, screws and plugs, cover caps for holes, without further accessories.