White inner rail standard 2-track for ceiling mounting.
Classic inner track curtain rod for ceiling mounting. An advantage of the inner rails is the possibility to move the curtain freely along the entire length of the rail. The brackets are installed in the upper run (fastening run) of the inner run profile and always keep the lower run (glider run) free, thus guaranteeing an all-round trouble-free path for the curtain.
You are ordering a complete inner track curtain rod consisting of: 2 pcs. inner rail profile Ø 20mm made of aluminium, the white powder-coated surface is absolutely suitable for our carriers and end pieces. Glider width 6mm, length from 100cm to 400cm. Lengths of up to 600cm (also in one piece) are also possible on request. 2 pieces or 3 pieces (depending on the length ordered) Standard 2-line ceiling bracket, material: stainless steel+aluminium, white powder-coated. 4 pcs. end pieces made of plastic, glossy white Desired number of curtain gliders, various glider systems of your choice. We recommend at least 10 gliders per 1 meter curtain width and run. *Custom-made products on request, apart from straight poles, we also manufacture all our inner poles in any other shape, absolutely curved according to your needs and space situation.
Order correct length.
Ordered length is the bar length without end pieces. *If desired, please enter the number in cm in the field "shorten by:". then we will cut the inner running profile to the right length for you. For example: If you need an inner rail of exactly 237 cm, then please select under "tube length"-240 cm, and in the field "cut by:" enter the number "3 cm". Profile sections are not sent. * Parcel service shipping: The aluminum profile is divided in the middle from a length of more than 260cm. A connection adapter is included. A support is to be attached to the connection point. * Freight forwarding: The aluminum profile (up to 400cm) is delivered in one piece. * Curtain rods 400-600cm (also undivided, in one piece) - price on request.
Inner track mounting system for attachment to the ceiling, standard 2-track, white.
You can place the ceiling supports on the inner rail absolutely freely. First, mount the bases on the ceiling according to the pole length. You can either attach the base with a hanger bolt or screw it directly with a Spax screw. Then slide the flat nut into the profile's fastening barrel and position it according to the base already attached. Screw the ceiling support rods to the flat nut with 2-track hanger brackets. Slide the construction towards the ceiling and insert the ceiling support rods into the sockets. Tighten (not too tight) the base grub screws. You can adjust the height of the support in the base by approx. 2 cm and thus align the curtain rod absolutely horizontally on the ceiling. If you want a smaller distance from the rod to the ceiling, it is possible to shorten the ceiling support rod with a hacksaw, the minimum possible distance is approx. 50mm.
Order desired gliders with hooks for curtains and curtains:
X Glider: Standard curtain gliders with pleating hooks, made entirely of plastic, color white, are inserted into the rail at the side.
rotary glider: Comfort curtain gliders with clip-on hooks, made entirely of plastic, color white, these gliders can be screwed in or out at any point on the inner track system.
Glides with stainless steel hooks: Very stable (up to 1.5 kg/each) and at the same time very smooth-running gliders with stainless steel hooks. Especially suitable for heavy drapes and drapes, wet areas and outdoor areas, e.g. curtains for vestibules or wind protection curtains for patios or balconies.
Loop gliders : Sliders for loop curtains made entirely of plastic, color white. Due to its semicircular shape, the sliding element offers very good sliding properties in all of our inner rails.
White internal track rod "Standard" double track for ceiling mounting.
Rod: Aluminum white powder-coated. Ceiling holder: V2A - Stainless steel and white powder-coated aluminum, end cap made of plastic, suitable for indoor and outdoor applications.
High-precision processing with CNC automatic lathes
Standard ceiling bracket 2-lfg. white, Base attachment to the ceiling with stud bolt or directly with Spax screw.
Pipe lengths from 100 to 400cm (can be shortened upon request). Pipes 400-600cm in one piece - price on request. Inner track profile with Ø20mm. Ceiling bracket length (distance ceiling-top edge of the profile) 5 to 45cm.
Plastic End Cap, Glossy White
Various Sliders of Choice
Scope of Delivery
Complete inner track rod: 2 pcs. rod, 2 or 3 pcs. ceiling holders (by rod length), 4 pcs. end pieces, sliders (optional), incl. mounting material.