Hotline & Consultation
in 57 categories
Last updated on:
Tuesday, October 10, 2017
Inox steel towel rods: Sont16 towel holder for perfect bathroom design.
Award winner 2003
Inox stainless steel towel holder Sont16, for perfect design in the bathroom
Towel rod made of stainless steel with rod Ø 16mm, brackets Sont 16, single- or double-rail, 4 fixed lengths or according to measurements
shower curtain rods
Towel holder Sont16 made of inox stainless steelStahldeko stainless steel accesories for perfect design in the bathroom: functional towel holder in thin design - Sont 16, as complete towel rods set in three modifications, incl. mounting material. Consists of stainless steel tube Ø 16mm, brackets Sont 16 in single-rail, double-rail or shorter single-rail modification, with stainless steel base plate and finials Zylinder. Simple mounting with 1-point fixing. With the help of additional brackets, joints and Wandlager can be expanded to towel rods in L-shape and U-shape.
Bracket system for towel rods Sont 16:
modifications and mounting system
|Bracket system Sont 16 for towel rod: rod bracket 1- and 2-rail + base plate|
|Bracket system Sont 16 for towel rods: rod bracket 1-rail short, with and without base plate|
|Towel rods mounting system Sont 16, 2-rail.|
|Mounting system Sont 16 for towel rod, 1-rail.|
|Mounting system Sont 16, 1-rail short, with and without base plate|
Application examples and expansion examples:
towel rods Sont 16, Ø 16mm
Towel rod Sont 16, L-shaped, inside corner solution for bathroom: You need stainless steel tube Ø 16mm acc. to measurement, one or two joints made of inox stainless steel Ø 16mm, bracket Sont16 single-rail short, single-rail or double-rail, base plates and finials (standard finials Zylinder). Due to movable joint towel rod angle is variable from 75° up to 285°
Towel rods Sont 16, L-shaped, outside corner solution for bathroom design: You need stainless steel tubes Ø 16mm-made, stainless-steel joints 16mm, carrier Sont 16 single stem-short, single stem or double-barreled, base plates and end caps (standard cylinder end pieces). The towel rod angle is variable from 75 ° to 285 °, thanks to moving joint made of stainless steel.
U-shaped towel bar decoration for outside corner Sont16: It requires two joints (G) with variable angle of 75 ° to 285 °. Conclusion is possible with end pieces or wall bearings. Following the same principle, the inner corner solution is realized.
Inner corner bay window decoration for bathroom design, towel rack in the Trapezoidal shape: thanks to the joint are moving Stahldeko towel bars for each wall angle fit, whether outside or inside corner.
|description:||Towel rod made of V2A inox stainless steel, Sont 16|
(depending on modification):
|V2A - stainless steel 18/10, DIN WNR 1.4301, inox, heat resistant, impact resistant, easy to clean|
|Machining:||high accuracy machining with CNC-automatic lathe|
|Surface:||polished surfaces, very good optical homogeneity, Particle distribution 240, optically raised|
|Suitable:||for bath, kitchen, shower and bathroom|
|Modification:||complete 1-rail towel holder, complete 2-rail towel holder|
|Bracket system:||V2A rod bracket Sont16, open, is screwed on a base plate|
|end knob:||Finial Zylinder stainless steel for tubes 16mm|
(depending on the modification):
|drill holes and screws are covered with base plate, wall or ceiling mounting, 1-point fixing with hanger bolt|
|Lengths:||Other lengths on request, 40, 50, 60 and 70 cm|
|Accessory:||additionally supplied: bracket, rings, hooks, finials, joints, tie-back, tubes, wall bracket|
Here are some examples of the form of curved towel rails and rods:
|rod for towels in S-shaped bend||Towel - Bar full circle||towel holder as a semi-circle curved||quarter circle and segment - for bending Holder||curved towel bar||semicircle with straight extensions turn|
|square-bend for Towel - Bar||U-shape curved rods for towels||L-shaped curved towel holder||holder as a bow with straight extension||towel Any angle bend||trapezoidal curved towel bar|