Hotline & Consultation
in 57 categories
Last updated on:
Wednesday, November 30, 2016
Sont10 design towel holder, Sont10 V2A stainless steel system for bath furnishing and bath design.
Award winner 2003
Design towel holder Sont10, V2A-stainless steel system Sont10 for bath furnishing and bath decoration
Towel holder with stainless steel rod Ø 10mm, bracket system Sont 10, single- or double-rail, 4 standard lengths or according to measurements
shower curtain rods
Design towel holders Sont10Stahldeko Stainless steel accessories for bath room design and bath decoration: Modern towel holder Sont 10 as complete traditional set in three modifications, incl. fixing parts. Including solid Ø 10mm stainless steel rod, brackets Sont 10 in single rod, double rod or shortened single rod modification with base plate of stainless steel without finials. Simple mounting witf 1-point fixing. Expandable to L or U shaped towel holder thanks to additional brackets, joints and wall brackets.
Bracket system for towel holders Sont 10:
Modifications and mounting system
|Towel holder bracket system Sont 10: Stainless steel single and double rod brackets + base plate|
|Towel holder bracket system Sont 10: single rod bracke. short with and without base plate. Material: V2A stainless steel.|
|Mounting system Sont 10, double rod|
|Mounting system Sont 10, single rod|
|Mounting system Sont 10, single rod short with and without base plate|
Examples of use and extension:
Towel holder Sont 10, Ø 10mm
Towel holder Sont 10, L shaped, inner corner solution for bathroom furnishing:You need a Ø 10mm custom sized stainless steel tubes, one or two Ø 10mm joints of stainless steel , brackets Sont 10, short single rod, single rod or double rod, base plates with or without finials (standard cylinder finials). From 75° to 285° variable angle thanks to movable joint
Towel holder Sont 10, L shaped, outer corner solution for bathroom design: You need stainless steel tube diameter 10mm-made, stainless steel joints Ø 10mm, Carrier Sont 10 single stem-short, single stem, or double-barreled, base plates, with or without tails (standard cylinder end pieces). The towel bar angle is variable from 285° to 75 ° , stainless steel joint, thanks to moving.
U-shaped towel holder decoration for outside corner Sont10: It requires two joints (G) with variable angle of 75 ° to 285 °. Conclusion is possible with end pieces or wall bearings. Following the same principle, the inner corner solution is realized.
Inner corner bay window decoration for Bathroom furnishings and bath design, towel holder in the trapezoidal-shape: Thanks to the joint motion Stahldeko-towel holder for each wall angles are appropriate, whether external or inside corner.
|description:||Towel holder made of V2A inox stainless steel, Sont 10|
(depending on modification):
|V2A - stainless steel 18/10, DIN WNR 1.4301, inox, heat resistant, impact resistant, easy to clean|
|Machining:||high accuracy machining with CNC-automatic lathe|
|Surface:||polished surfaces, very good optical homogeneity, Particle distribution 240, optically raised|
|Suitable:||for bath, kitchen, shower and bathroom|
|Modification:||complete 1-rail towel holder, complete 2-rail towel holder|
|Bracket system:||stainless steel rod bracket Sont10, open, is screwed on a base plate|
|end knob:||Without finials, optional all finials for stainless steel tubes 10mm|
(depending on the modification):
|drill holes and screws are covered with base plate, wall or ceiling mounting, 1-point fixing with hanger bolt|
|Lengths:||Other lengths on request, 40, 50, 60 and 70 cm|
|Accessory:||additionally supplied: bracket, rings, hooks, finials, joints, tie-back, tubes, wall bracket|
Here are some examples of the form of curved towel rails and rods:
|rod for towels in S-shaped bend||Towel - Bar full circle||towel holder as a semi-circle curved||quarter circle and segment - for bending Holder||curved towel bar||semicircle with straight extensions turn|
|square-bend for Towel - Bar||U-shape curved rods for towels||L-shaped curved towel holder||holder as a bow with straight extension||towel Any angle bend||trapezoidal curved towel bar|