Hotline & Consultation
in 57 categories
Last updated on:
Wednesday, November 30, 2016
System Pfosten 10: V2A stainless steel towel holder for bathroom and shower.
Award winner 2003
Towel holder made of stainless steel V2A, system Pfosten 10, for bathroom and shower
Design towel holder with stainless steel rod Ø 10mm, bracket system Pfosten 10, 2 modifications, 4 fixed lengths or acc. to measurements
shower curtain rods
Stainless steel towel holder Pfosten 10Stahldeko products for bathroom or shower: classic towel holder Pfosten 10, as complete set in single-rail modification, incl. mounting material. Consists of stainless steel rod Ø 10mm, brackets Pfosten 10 in side closed modification, optionally with or without base plate. Simple mounting with 1-point fixing. With the help of middle brackets, joints and wall bracket can be extended to towel holder in L-shape and U-shape.
Bracket system Pfosten 10 for towel holder: mounting system
|Complete bracket system Pfosten 10: rod bracket with and without base plate (Fig. side open modification)|
|Towel holder mounting system Pfosten 10: with and without base plate|
|Extension for towel holder system Pfosten (Abb. Pfosten 16): extension (50mm) for bracket Pfosten 10.|
Application examples and expansion examples:
towel holder Pfosten 10, Ø 10mm
Towel holder Pfosten 10, L-shaped, internal corner solution for bathroom: You need stainless steel tubes Ø 10mm according to measurements, a joint made of stainless steel Ø 10mm, bracket Pfosten 10 in side open and side closed modification with or without base plate. Due to movable joint, the towel holder angle is variable from 75° up to 285°
Towel holder Pfosten 10, L-shaped, outside corner solution for shower: You need stainless steel rods Ø 10mm according to measurements, one stainless steel joint Ø 10mm, 2 brackets Pfosten 10 side open and 2 closed with or without base plate. The towel holder angle is variable from 75° up to 285°, due to movable joint.
U-shaped towel holder decoration for outside corner: 2 joints (G) with variable angle from 75° up to 285° are required. Ending is possible with closed brackets or wall brackets Wandlager. Inside corner solution is implemented in the same manner.
Decorate inside corner in the bathroom or shower, towel holder in the trapezoidal-shape: Thanks to the joint motion Stahldeko-towel holder for each wall angles are appropriate, whether external or inside corner.
|description:||Towel holder made of stainless steel V2A System Pfosten 10|
(depending on modification):
|V2A - stainless steel 18/10, DIN WNR 1.4301, inox, heat resistant, impact resistant, easy to clean|
|Machining:||high accuracy machining with CNC-automatic lathe|
|Surface:||polished surfaces, very good optical homogeneity, Particle distribution 240, optically raised|
|Suitable:||for bath, kitchen, shower and bathroom|
|Modification:||complete 1-rail towel holder|
|Bracket system:||stainless steel bracket Pfosten 10 side closed|
|end knob:||Stainless steel bracket Pfosten 10 at the same time, as finial|
(depending on the modification):
|1-point fixing with bolts and Spax-screws, drill holes and screws are covered with base plate, wall or ceiling mounting|
|Lengths:||Other lengths on request, 30, 40, 50 and 60 cm|
|Accessory:||additionally supplied: bracket, rings, hooks, joints, rod bracket extensions, tie-back, tubes, wall bracket|
Here are some examples of the form of curved towel rails and rods:
|rod for towels in S-shaped bend||Towel - Bar full circle||towel holder as a semi-circle curved||quarter circle and segment - for bending Holder||curved towel bar||semicircle with straight extensions turn|
|square-bend for Towel - Bar||U-shape curved rods for towels||L-shaped curved towel holder||holder as a bow with straight extension||towel Any angle bend||trapezoidal curved towel bar|